View MZ10GD15V-17_4390704.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ZENER DIODE
MZ1.0GD3V3 THRUMZ1.0GD100
FEATURES
* * *
*
Silicon Planar Power Zener Diodes For use in stabilizing and clipping circuits with High power rating Standard Zener Voltage tolerance is 5%, Add suffix "A" FOR 10% tolerance Other Zener voltages and Tolerances are available upon request These diodes are also available in the MELF case with type Designation MZ1.0GM3V3 thru MZ1.0GM100
MECHANICAL DATA
* *
Case: DO-41 Glass Case Weight: approx.0.35g
MAXIMUN RATINGS AND ELECTRICAL CHARACTERISTICS
*
Ratings at 25 ambient temperature unless otherwise specified Symbols Zener Current (see Table "characteristics") Power Dissipation at Tamb= Junction Temperature Storage Temperature Range Ptot Tj Ts 1.0(1) 150 -50to+150 Watts Limits Unit
Characteristics at Tamb=25
Symbols Thermal Resistance Junction to Ambient Air Forward Voltage at IF=100mA RthJA VF
Min -
Typ -
Max 170(1) 1.2
Unit /W Volts
Notes
1. Valid provided that electrodes at a distance of 10mm from case are kept at ambient temperature.
E-mail: sales@cnmic.com
Web Site: www.cnmic.com
ZENER DIODE
MZ1.0GD3V3 THRUMZ1.0GD100
ELECTRICAL CHARACTERISTIC
Ratings at 25 ambient temperature unless otherwise specified
Device Marking Code Zener Valtage(3) at IZT Vz(v) ( Vz5%)(4) MIN MZ1.0GD3V-76 MZ1.0GD3V-69 MZ1.0GD3V-64 MZ1.0GD4V-58 MZ1.0GD4V-57 MZ1.0GD5V--49 MZ1.0GD5V-45 MZ1.0GD6V-41 MZ1.0GD6V-37 MZ1.0GD7V-34 MZ1.0GD8V-31 MZ1.0GD9V-28 MZ1.0GD10V-25 MZ1.0GD11V-23 MZ1.0GD12V-21 MZ1.0GD13V-19 MZ1.0GD15V-17 MZ1.0GD16V-15.5 MZ1.0GD18V-14 MZ1.0GD20V-12.5 MZ1.0GD22V-11.5 MZ1.0GD24V-106 MZ1.0GD27V-9.5 MZ1.0GD30V-8.5 MZ1.0GD33V-7.5 MZ1.0GD36V-7.0 MZ1.0GD39V-6.5 MZ1.0GD43V-6.0 MZ1.0GD47V-5.5 MZ1.0GD51V-5.0 MZ1.0GD56V-4.5 MZ1.0GD62V-4.0 MZ1.0GD68V-3.7 MZ1.0GD75V-3.3 MZ1.0GD82V-3.0 MZ1.0GD91V-2.8 MZ1.0GD100V-2.5
Notes:
(1). The Zener impedance is derived from the 1KHz AC voltage which results when an AC current having an RMS value equal to 10% of the Zener current (IZT or IZK) is superimposed on IZT or IZK . Zener impedances is measured at two point to insure a sharp knee on the breakdown
Type
Test Current IZT (mA) 76.0 69.0 64.0 58.0 53.0 49.0 45.0 41.0 37.0 34.0 31.0 28.0 25.0 23.0 21.0 19.0 17.0 15.5 14.0 12.5 11.5 10.5 9.5 8.5 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.7 3.3 3.0 2.8 2.5
Maximum Zener Impedance(1) ZZT At IZT () 10 10 9 9 8 7 5 2 3.5 4 4.5 5 7 8 9 10 14 16 20 22 23 25 35 40 45 50 60 70 80 95 110 125 150 175 200 250 350 ZZK () 400 400 400 400 500 550 600 700 700 700 700 700 700 700 700 700 700 700 750 750 750 750 750 1000 1000 1000 1000 1500 1500 1500 2000 2000 2000 2000 3000 3000 3000 at IZK
(mA)
Maximum Reverse Leakage Current at VR IR
(A) (V)
Surge Current at TA=25 IR(mA)
Maximum Regulator Current(2) IZM(mA) 276 252 234 217 193 178 162 146 133 121 110 100 91 83 76 69 61 57 50 45 41 38 34 30 27 25 23 22 19 18 16 14 13 12 11 10 9
MAX 3.47 3.78 4.1 4.52 4.94 5.36 5.88 6.51 7.14 7.88 8.61 9.56 10.5 11.5 12.6 13.65 15.75 16.8 18.9 21 23.1 25.2 28.35 31.5 34.65 37.6 40.95 45.15 49.35 53.55 58.8 65.1 71.4 78.75 86.1 85.55 105
3V3-76 3V6-69 3V9-64 4V3-58 4V7-57 5V1-49 5V6-45 6V2-41 6V8-37 7V5-34 8V2-31 9V1-28 10V-25 11V-23 12V-21 13V-19 15V-17 16V-15.5 18V-14 20V-12.5 22V-11.5 10.624V279.5V30V8.533V-7.5 36V-7.0 39V-6.5 43V-6.0 47V-5.5 51V-5.0 56V-4.45 62V-4.0 68V-3.7 75V-3.3 82V-3.0 91V-2.8 100V-2.5
3.14 3.42 3.7 4.08 4.46 4.84 5.32 5.89 6.46 7.13 7.79 8.65 9.5 10.45 11.4 12.35 14.25 15.2 17.1 19 20.9 22.8 25.65 28.5 31.35 34.4 37.05 40.85 44.65 48.46 53.2 58.9 64.6 71.25 77.9 86.45 95
1 1 1 1 1 1 1 1 1 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25
100 100 50 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
1 1 1 1 1 1 2 3 4 5 6 7 7.6 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.7 56 62.2 69.2 76
1380 1260 1190 1070 970 890 810 730 660 605 550 500 454 414 380 344 304 285 250 225 205 190 170 150 135 125 115 110 95 90 80 70 65 60 55 50 45
(2). Valid provided that electrodes are kept at ambient temperature. (3). Measured under thermal equilibrium and DC test fonditions. (4). Standard Zener Voltage tolerance is 5%. Add suffix "A" for 10% tolerance.
E-mail: sales@cnmic.com
Web Site: www.cnmic.com
ZENER DIODE
MZ1.0GD3V3 THRUMZ1.0GD100
RATING AND CHARACTERISTIC CURVES MZ1.0GD3V3 THRU MZ1.0GD100
FIG.1-ADMISSIBLE POWER DISSIPATION VERSUS AMBIENT TEMPERATURE
Valid provided that leads are kept at ambient temperature or adistance of 10mm from case
mA 240
FIG.2-BREAKDOWN CHARACTERISTICS
Tj =constant (pulsed)
W 1.0
3.9 200
IZ
4.7
Tj =25 5.6
160 0.8 120
Ptot
6.8 Test Current Iz 100mA 8.2 10 12 5mA
80 0.6
40
0 0 0.4 1 2 3 4 5 6 7 8 9 10
VZ
11
12
13
14
15V
0.2
0 0 100
Tamb
200
FIG.3-BREAKDOWN CHARACTERISTICS
Tj =constant (pulsed)
mA 60 15 50 18 Tj =25 22 27
IZ
FIG.4-BREAKDOWN CHARACTERISTICS
Tj =constant (pulsed)
ZMY... mA 20 56 ZMY... Tj =25
40 Test Current Iz 30 5mA 33 39 47 20 10mA 10
68
IZ
Test Current Iz 10mA 10
82 100
5mA
0 0 5 10 15 20 25
VZ
0 30 35 40 45 50V 0 50 100
VZ
150
200V
E-mail: sales@cnmic.com
Web Site: www.cnmic.com

▲Up To Search▲

Price & Availability of MZ10GD15V-17

	To Download MZ10GD15V-17 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .